During BENEBION´s process, the treated products do not absorb the same amount of ionizing energy in all their volume, mainly because of to the own geometry of the equipment and to the thickness of the product pallets in which they are treated.

For this reason, the quality control of this process is a fundamental component in the daily operation of the installation and is the base of the accreditations and authorizations that will be obtained for their operation,  by national and international agencies.

The quality control of BENEBION´s process is done using the alanine dosimeters (see Dosimetry) in the following stages:

• Irradiator Qualification. - To determine the positions of the maximum and minimum values absorbed dose in the volumes of the product pallets.
• Process Qualification. - To establish the operation parameters of BENEBION´s process, for each type of product.
• Routine Dosimetry. - To measure the absorbed dose in products during their  treatment in the facility and to issue its certificate of dosimetry.